Skip to main content
logo

February 5-7, 2019
Anaheim Convention Center
Anaheim, CA

  • EXPO
    • Expo Overview
    • Attendee-to-Exhibitor Matchmaking
    • Passes & Pricing
    • 2018 Exhibitor Directory
    • 2018 Exhibitor Products
    • Floor Plan
    • Code of Conduct
  • Education
    • Conference Overview
    • 2018 Full Schedule
    • 2018 Speakers
    • Medtech Advisory Group
  • Exhibit
    • Why Exhibit
    • Become an Exhibitor
    • Exhibitor Center
    • Floor Plan
  • Resources
    • Media Center
    • Hotel & Travel
    • FAQs
  • Registration Inquiry
Registration Inquiry

Exhibitor Directory

  • (-) Remove E filter E
Companysort descending
Booth
Keywords
E-Pak Machinery Inc.
5058
Cappers, Conveyors, Fillers, Labeling
La Porte, IN

E-Pak Machinery Inc. is a quality manufacturer and supplier of complete liquid packaging systems that are used to fill, cap, label, and code a wide variety of liquid products. It offers long-term, value-based packaging solutions specifically designed to fit the needs of particular project requirements. E-Pak's filling systems are fully capable of meeting the needs of food-grade, sanitary, pharmaceutical, hazardous, and corrosive environments.

Visit us on Packaging Digest
Social Networks
E-valucon Inc.
4347
Assembly, Cable and Wires, Electronics Manufacturing Services
Irvine, CA

E-valucon Inc. is a connector, antenna, and cable assembly manufacturer and solutions provider for vision and sensor FA solutions. The company also provides medical connection solutions as well as machined parts.

Visit us on Design News
EAG Laboratories
1828
Quality and Testing, Regulatory and Compliance, Research and Development, Testing Services
Sunnyvale, CA

EAG Laboratories, a global scientific services company, offers materials, electronics, and chemical testing for medical device development, as well as surface analysis, polymer chemistry, ISO 10993 Part 18 chemical characterization of materials, failure analysis, and litigation support. Nine ISO 17025 laboratories help clients overcome R&D roadblocks, avoid regulatory setbacks, and solve problematic manufacturing issues.

Visit us on Qmed
Social Networks
Eagle Labs, Outsource Div.
2558
Ophthalmology, Packaging Services
Rancho Cucamonga, CA

Eagle Labs Outsource Division is a provider of form/fill/seal packaging for single-use medical devices. The company provides pouching, sterilization, and final boxing for medical devices.

Visit us on
Eagle Medical Inc. Packaging and Sterilization
1286
Cleanroom, Medical Device Assembly, Packaging Services, Sterilization Services
Paso Robles, CA

Eagle Medical Inc. offers efficient and FDA-compliant assembly, packaging, and hydrogen peroxide gas plasma specific sterilization services for the medical device and pharmaceutical industries. With more than 25 years of experience, it is dedicated to industrial sterilization requirements and meeting the highest of industry standards: FDA registered, ISO 13485:2013 certified, ISO 14937 certified, and ISO 14644-1 Class 7 cleanroom certified

Visit us on Qmed
Eagle Stainless Tube & Fabrication Inc.
2941
Medical Device Components, Medical Tubing Processing
Franklin, MA

For 36 years, Eagle Stainless Tube & Fabrication Inc. has been a supplier of stainless-steel tubing, nickel alloys, and aluminum. The company offers custom-fabricated components, including bending/coiling, cutting, CNC machining, EDM, and more. Eagle supplies millions of feet per year to the medical, aerospace, energy, and industrial industries. ISO 9001 and ISO 13485 certified.

Visit us on
Visit us on Design News
Social Networks
Products
Cut to length TubingCut to length Tubing
Lab Sample KitLab Sample Kit
Eagle Vision and Automation
4542
Controls, Integrators and Factory Solutions, Robots and Robotic Accessories, Vision Inspection Systems and Services
Yorba Linda, CA

Eagle Vision and Automation is a robotic systems integrator featuring ABB FlexTending systems.

Visit us on Design News
EarthLCD.com
962
Consultants, Embedded Systems or Tools or Software, LEDs and LCDs
Irvine, CA

EarthLCD has been a leading American manufacturer of custom TFT and touchscreen LCD products for 25 years. The company's working knowledge of the display industry has developed from an “in the trenches” approach. It manufactures different sizes of complete LCD and touch-screen solutions from 2.6 to 32-in., including the ezLCD-405/programmable GUI with a 5.6-in. LCD and touchscreen. The EarthVision TFT LCD monitor controller will also be shown.

Visit us on Qmed
East Montgomery County Improvement District (EMCID)
4471
Contract Manufacturers, Integrators and Factory Solutions, Supply Chain
New Caney, TX

EMCID, located northeast of Houston, is a political subdivision of the state of Texas responsible for promoting economic and community development. The company's industrial park—located just minutes from the Grand Parkway, Bush Intercontinental Airport, and the Port of Houston—has sites available for business expansion opportunities. EMCID offers financial incentives, an available workforce, and an outstanding logistic infrastructure.

Visit us on Design News
Visit us on Packaging Digest
Social Networks
Products
East Montgomery County Industrial ParkEast Montgomery County Industrial Park
Eastek International
1572
Contract Manufacturing Services, Medical Device Assembly, Medical Plastics, PCBs
Lake Zurich, IL

Eastek International is celebrating more than 26 years as a vertically integrated, global contract manufacturer delivering American standards with low-cost efficiencies. The company, a mid-tier high-mix, low/high-volume manufacturer, provides a range of services for Class I and II medical device customers. ISO 13485 and FDA QSR compliant, its 1,000 full-time staff in the United States, Europe, and China, work on product solutions.

Visit us on Qmed
Social Networks
Eastman Chemical Co.
2401
Medical Materials - Raw Materials, Medical Plastics
Kingsport, TN

Eastman Chemical Co. has been a worldwide supplier of a wide range of materials for the medical market for more than 70 years, while consistently raising standards for quality, patient safety, customer service, and sustainability. Today, as always, the company is committed to the long-term needs of the medical industry and is a reliable provider of innovative medical-grade polymers and technical support.

Visit us on
Social Networks
easyDec SA
744
Contract Manufacturing Services, Surface Treatment Coatings, Surface Treatment Services
Delémont

easyDec SA is an innovative, modern Swiss contract manufacturers that is highly specialized in precision turned parts and microcomponents. Besides turning, the company offers milling and a huge variety of surface treatments as well as assembling services. Precision is easyDec's passion.

Visit us on Qmed
Social Networks
ebm-papst Inc.
3191
Controls, Medical Device Components, Motion Control, Motors
Farmington, CT

ebm-papst Inc. is an innovator and market leader in fans, blowers, and motors with core competencies in motor technology, aerodynamics, and electronics. With more than 15,000 products, the company provides solutions to a wide range of markets, including air-conditioning and ventilation, appliance, automotive, commercial refrigeration, heating, industrial, lighting, IT/telecom, medical, transportation, and more.

Visit us on Qmed
Social Networks
Eclipse Automation FEATURED
4349
Automation, Integrators and Factory Solutions, Production Machines and Equipment, Robots and Robotic Accessories
Cambridge, ON

Eclipse Automation is a leading supplier of custom automated manufacturing equipment for the solar, life sciences, transportation, mining, consumer/industrial, and telecommunications/electronic industries.

Visit us on Design News
Social Networks
Products
Eclipse Automation, custom automated manufacturing supplierEclipse Automation, custom automated manufacturing supplier
Ecolab
2115
Contract Manufacturing Services
Alpharetta, GA

Ecolab provides worldwide regulatory-compliant infection-control products and services through OEM/contract manufacturing. Capabilities include design and manufacture of surgical, sterile packaged patient and equipment draping, fluid control products, and other innovations to meet customer needs.

Visit us on Qmed
Social Networks
ED&D, Educated Design & Development
1711
EMC and EMI Shielding, Regulatory and Compliance, Testing Equipment, Testing Services
Raleigh-Durham (Cary), NC

ED&D is a world-leading manufacturer and supplier of UL, IEC, and CE-type product safety test equipment. Products include Hipot testers, impact hammers, IP code spray test equipment, access probes, force gauges, burn test equipment, dust chambers, and more.

Visit us on Qmed
Products
Bunson burnerBunson burner
Edgewater Automation
4277
Automation, Conveyors and Feeders, Material Handling, Vision Inspection Systems and Services
Saint Joseph, MI

Edgewater Automation designs and builds custom automation equipment for a wide variety of industries. The company has locations in St. Joseph, Michigan, and Spartanburg, South Carolina, where engineering, machining, and building all take place. Featured on the Inc. 5000 list of fastest-growing companies in America, Edgewater Automation is constantly improving and growing in talent, experience, and technology. It is an ISO 9001:2015–certified QMS.

Visit us on Design News
Visit us on Packaging Digest
Social Networks
Products
Global Factory Automation SystemsGlobal Factory Automation Systems
EDrive Actuators Inc.
4568
Automation, Fluid Power Handling and Control, Integrators and Factory Solutions, Motion Control
West Hartford, CT

EDrive patented the original electric linear actuator design and has been delivering industrial actuators since 1980. Its business has grown based on its philosophy of design flexibility and rapid response. EDrive offers standard electric linear actuators from 100 to more than 100,000 lbf and customized solutions, including designs in stainless steel. It delivers short industry lead times and an unsurpassed commitment to superior products.

Visit us on Design News
EDRO Engineering Inc.
3446
Injection Molding, Metals and Alloys
Walnut, CA

EDRO Engineering Inc. is a leading manufacturer of custom mold bases and specialty steels for the plastics and rubber tooling industries. The company offers a comprehensive line of unique and innovative proprietary steels: RoyAlloy stainless, EDRO400 and P1FM, as well as premium aluminum products. EDRO is now the exclusive distributor of BÖHLER tool steels ready to handle the toughest requirements all across the United States.

Visit us on Qmed
Visit us on Design News
Edwards Lifesciences
1551
Cardiovascular, Medical Device Assembly, Medical Device Components, Packaging Equipment
Irvine, CA

Edwards Lifesciences is a global leader in patient-focused medical innovations for structural heart disease, as well as critical care and surgical monitoring. 

Visit us on Qmed
Social Networks
Effytec USA
5010
Beverage Packaging, Cosmetic Packaging, Food Packaging, Form-Fill-Seal
De Pere, WI

Effytec USA manufactures horizontal form-fill-seal pouch machinery and pre-made pouch fill-seal machinery for packaging all types of products in flat three- or four-sided seal sachets, stand-up pouches with reclosable zipper or cap, or shaped pouches for the food, beverage, pharmaceutical, and cosmetic industries.

Visit us on Packaging Digest
EG-GILERO
3087
Contract Manufacturing Services, Design Services, Regulatory and Compliance, Testing Services
Morrisville, NC

EG-GILERO is a single-source, trusted partner for design, development, and manufacturing within the medical device and drug delivery systems markets. With operations in the United States, Dominican Republic, and Asia, the company is strategically positioned to provide the value-added services its clients require in a competitive, ever-changing global marketplace.

Visit us on
Social Networks
EirMed
816
Automation, Medical Device Assembly, Molding Services, Packaging Services
Menomonie, WI

EirMed is a leading provider of accelerated precision injection-molding and tool-building services to the medical device and life science markets. On-site automated manufacturing cell development is available, as well as finished product assembly and packaging in a Class 7 cleanroom environment.

Visit us on Qmed
EIT-Instrument Markets
1073
Contract Manufacturing Services, Testing Equipment
Leesburg, VA

EIT designs and builds UV measurement instruments (radiometers, profiling radiometers, online sensors) for control of UV LED, arc, spot, and microwave sources.

Visit us on Qmed
Products
LEDCureLEDCure
EK Express
5581
Las Vegas, NV
Visit us on Packaging Digest
EK Express
4996
Las Vegas, NV
Visit us on Packaging Digest
Ekato
5483
Cosmeceuticals, Cosmetics, Drying Systems, Nutraceuticals
Oakland, NJ

Ekato is a market leader in the field of agitation and mixing technology of fluids and solids. The company develops, designs, and manufactures industrial agitators, mixers, dryers, mechanical seals, and turnkey mixing systems. Customers use Ekato mixers in the chemical, cosmetic, pharmaceutical, power generation, mineral processing, and other industries.

Visit us on Packaging Digest
Products
EKATO UNIMIX LMEKATO UNIMIX LM
EKS Plastics
3550
Injection Molding, Plastics and Elastomers
Livermore, CA

EKS Plastics is a USA-headquartered manufacturing company and division of Ekcos Innovations. EKS Plastics has developed innovative plastics products to improve the hygiene and cleaning industry. Moreover, the company supplies other plastics and packaging solution for many industries. With more than 25 years of experience in developing successful products, EKS Plastics is a trusted worldwide supplier.

Visit us on Design News
EKSPLA
1175
Lasers
Vilnius

EKSPLA is a manufacturer of DPSS lasers, optoelectronics, and power supplies for industrial micromachining applications. Products include the Atlantic pico-second laser, a DPSS laser with up to 60W average power at 1064 nm, with options for 532 nm and 355 nm harmonics. This laser is an excellent choice for high-throughput material processing applications.

Visit us on Qmed
Elcam Medical Inc.
2445
Disposables, Medical Device Assembly, Medical Device Components
Hackensack, NJ

Elcam Medical Inc. is a leading worldwide OEM supplier in the area of infusion therapy, vital signs monitoring, and drug delivery. The company is excited to present its components with its new lipid-resistant product line utilizing Tritan™ material, its offerings for the new ISO 80369 standards, and Safe2Rotate options to prevent misconnections. Visit Elcam's booth to see where everything connects.

Visit us on
Social Networks
Products
Lipid Resistant, Tritan integrated IV ProductsLipid Resistant, Tritan integrated IV Products
Elcon Precision LLC
2393
Design Services, Medical Device Components, Research and Development, RF and Microwave
San Jose, CA

Elcon Precision LLC produces custom components for medical devices using a variety of manufacturing technologies, including photochemical machining, ceramic to metal assembly, ceramic metallization, and plating. Products include RF and microwave therapy antennas, X-ray tube components, arthroscopy components, communications antennas, electronic components, feed-throughs, and sealed endoscopic optical and therapy delivery windows.

Visit us on Qmed
Visit us on Design News
Social Networks
Products
Complex 2D & 3D etched metal geometryComplex 2D & 3D etched metal geometry
Eldon James Corp.
2062
Contract Manufacturing Services, Disposables, Medical Device Components, Medical Tubing Types
Denver, CO

Eldon James Corp. celebrates 30 years of manufacturing PVC-free medical components, tubing, and assemblies used for life sciences, biomedical, pharmaceutical, and similar critical-use applications. Its quality certifications include ISO 9001:2008 and ISO 13485:2003. Eldon James offers Class 7 cleanroom and contract manufacturing opportunities with a portfolio of capabilities that include extrusion, injection molding, formed tubing, and assembly.

Visit us on
Products
Contract Manufacturing Assemblies - Tubing, ConnectorsContract Manufacturing Assemblies - Tubing, Connectors
Eldon James Corp.
680
Contract Manufacturing Services, Disposables, Medical Device Components, Medical Tubing Types
Denver, CO

Eldon James Corp. celebrates 30 years of manufacturing PVC-free medical components, tubing, and assemblies used for life sciences, biomedical, pharmaceutical, and similar critical-use applications. Its quality certifications include ISO 9001:2008 and ISO 13485:2003. Eldon James offers Class 7 cleanroom and contract manufacturing opportunities with a portfolio of capabilities that include extrusion, injection molding, formed tubing, and assembly.

Visit us on
Products
SeriesLock™ Spring-free Flow Path™ Quick Disconnect CouplerSeriesLock™ Spring-free Flow Path™ Quick Disconnect Coupler
Electrolizing Corp. of Ohio
2973
Surface Treatment Coatings
Cleveland, OH

Electrolizing Corp. of Ohio's validated processes include MEDCOAT 2000™ biocompatible chromium coating for instruments and devices, aluminum anodizing (Type II and Type III hardcoat, Ti-Med 2 titanium anodizing (Type II—grey), Ti-Med 3 titanium anodizing (Type III—color anodizing), hard chrome plating (thin dense chrome, low-friction chrome), electropolishing for stainless steel, and passivation of titanium and stainless steel.

Visit us on Qmed
Products
MEDCOAT 2000MEDCOAT 2000
Electronic Hardware Corp.
3556
Contract Manufacturing, Injection Molding, Mechanical Components, Precision Machining Parts and Services
Ronkonkoma, NY

Electronic Hardware Corp. (EHC) is a premier manufacturer of control knobs, clamp knobs, industrial hardware, and value-added assemblies.

Visit us on Design News
Social Networks
Elektrisola Inc.
1793
Cable and Wires, IV Products, Medical Device Components, Medical Tubing Types
Boscawen, NH

EMT produces tight-tolerance polyimide tubing with value-added processes such as thin wall PTFE liners or topcoat, braid, coiled, and PTFE-coated mandrels. MWS offers film insulated wire products from metals such as copper, stainless steel, nickel, constantan, and gold with coatings including polyurethane, polyester, and polyimide, for electrophysiology and cardio applications.

Visit us on Qmed
Element Materials Technology
2515
Testing Services
Hillsboro, OR

Element strives to provide certainty by delivering accurate and reliable results for its clients, from start-up ventures to blue chip manufacturers. As a comprehensive global testing partner, the company is a single-supplier source for testing and compliance, from materials testing and EMC compliance to wireless device testing. Element now offers product safety testing. Please visit its engaged experts for more information.

Visit us on Qmed
Elesa USA Corp.
3376
Hardware, Motion Control, Packaging Materials and Products
Twinsburg, OH

Elesa USA Corp. designs and manufactures plastic elements and accessories to the ISO 9001 specification standard. The company's designed products include hand wheels, crank handles, knobs, adjustable handles, hinges, rotary control indicators, leveling feet, and a color-filled Ergostyle line.

Visit us on Qmed
Elexes
382
Quality and Testing, Regulatory and Compliance, Research and Development, Testing Services
Dublin, CA

For a successful product launch or continued market success, Elexes offers an integrated team that owns the deliverables end-to-end. An expert with more than 20 years of experience, the company has diverse experience in CE Marking, ISO 13485 certification, and FDA approval, and has obtained worldwide marketing authorization for several companies, all at the best industry rates.

Visit us on Qmed
Products
Regulatory and Quality System ServicesRegulatory and Quality System Services
Elixir Photonics Inc.
972
Lasers
Fremont, CA

Elixir Photonics Inc. is a distributor of Bellin Laser ultrafast lasers and Delphi Laser system solutions. Located in Silicon Valley, the company operates an applications lab with a variety of equipment to match each application's requirements.

Visit us on Qmed
Products
3~5W UV Laser3~5W UV Laser
Elkem Silicones
2239
Implantable Devices, Medical Adhesives, Medical Materials - Raw Materials, Medical Tubing Types
East Brunswick, NJ

Elkem Silicones offers a full range of Silbione® silicones for medical and electronic applications, including LSRs, HCRs, RTVs, skin adhesives, gels, and fluids, as well as newly launched materials suitable for long-term implant. The company's Silbione® brand materials are manufactured in its new state-of-the-art clean manufacturing facility and designed to meet customers' biocompatibility, quality, and lot-to-lot consistency needs.

Visit us on Qmed
Elkhart Plastics
4968
Bulk Containers, Food Packaging, Pallets, Rigid Containers
Ridgefield, WA

Elkhart Plastics is an experienced leader in the design and manufacturing of rotomolded material-handling products. The company's engineers have designed intermediate bulk containers, hoppers, pallets, poly combos, and many other products for liquid and dry granular applications.

Visit us on Packaging Digest
Products
Tuff StackTuff Stack
Ellab Inc.
834
Hardware, Quality and Testing, Software
Denver, CO

Ellab Inc. manufactures a full line of wireless, real-time data loggers and wired thermocouple validation systems with temperature, humidity, pressure, vacuum, and CO2 sensor options. The company also offers on-site validation services provided by experienced engineers for any temperature mapping needs. These environments often include –80°C freezers, incubators, stability chambers, autoclaves, and ovens.

Visit us on Qmed
Elliott
5255
Case Packing Machinery
Villard, MN

Elliott was founded in 1927 (later becoming incorporated in 1929) and has been continuously providing the industry with reliable solutions for 80 years. Currently located in Villard, Minnesota, the company specializes in case erectors and sealers, both tape and glue, at speeds up to 35 cases per minute.

Visit us on Packaging Digest
ElringKlinger Engineered Plastics North America Inc.
1370
Cleanroom, Medical Device Components, Medical Plastics, Medical Tubing Processing
Buford, GA

For more than 50 years, ElringKlinger Engineered Plastics has been one of the technology leaders for seals and engineering design elements. The company develops and manufactures individual solutions from high-performance plastics such as PTFE, PTFE compounds, PTFE composites, and other fluoropolymer materials. ElringKlinger's solutions meet the toughest demands found in the field, with economy and reliability guaranteed.

Visit us on Qmed
Elytone Electronic Co.
570
Medical Device Assembly, Medical Device Components, Molding Services, Wireless
Valencia, CA

For 36 years, Elytone Electronic Co. has been a leading contract manufacturer of electronic and molded components and assemblies. The company has 1,000,000 sq ft of production space and is ISO 9000, ISO 13485, and FDA registered at all its manufacturing facilities. Sourcing direct with Elytone saves development time and money while improving quality.

Visit us on Qmed
EMA Pharmaceuticals
5375
Closures, Pharmaceutical Packaging
Lailly-en-Val

EMA Pharmaceuticals is a leading manufacturer of closures for pharmaceutical and medical containers, serving more than 170 production sites worldwide. Its production facility is certified to ISO 15378. The company's Clean-Certified Caps provide seals that are “ready-to-sterilize” and “ready-to-use.” EMA Smart-Seal, with RFID-featured push-off caps, is an innovative solution.

Visit us on Packaging Digest
EMI/UV
1427
Adhesives
Breckenridge, CO

Electronic Materials Inc. (EMI) continues to innovate medically approved UV-cured adhesives for device assembly, including both acrylic- and epoxy-based systems, specializing in epoxy-based adhesives. The company offers a product line for device manufacturers that have a need for hydrophilic adhesives and other medical coatings technologies, for improving surface lubricity on medical disposables.

Visit us on Qmed
Emplex Bag Sealing Solutions, a Div. of Plexpack
4979
Food Packaging, Medical Packaging, Sealers
Toronto, ON

Emplex Bag Sealing Solutions will be displaying its range of new PLC-controlled MPS series constant-load bag sealers featuring the new Vacuum-Gas sealer, and the new VacPack line of Vacuum Sealers. These sealers are available in tabletop, stand-alone, conveyorized, high-speed, and medical/validatable configurations.

Visit us on Packaging Digest
EMS-GRIVORY America
674
Medical Materials - Raw Materials
Sumter, SC

EMS-GRIVORY America is an innovative worldwide producer of specialty nylon engineering polymers serving the automotive, industrial and consumer, optics, packaging, medical, sanitary, and E/E markets. The company's focus is bringing solutions to customers, primarily in the areas of metal, glass, and rubber replacement. EMS-GRIVORY helps customers solve their material problems.

Visit us on Qmed
Enargy Power Corp.
248
Power Supplies and Converters
San Ramon, CA

Specialized in the design and manufacture of robust, high-quality power conversion systems, Enargy Power Corp. carries a broad range of DC-DC converters and AC-DC power supplies. There are more than 1,000 models in its product line designed to meet the requirements of a broad range of applications. The company manufactures both standard and customized high-density and high-power, multiple-output modules for medical device applications.

Visit us on Qmed
ENGEL
3715
Automation, Injection Molding, Lightweighting, Training and Education
York, PA

ENGEL manufactures injection molding machinery, from 30–6,000 U.S. tons, with all-electric, tie-bar-less, toggle, and two-platen machines. Providing technology solutions for more than 70 years, the company offers an extensive selection of process and advanced molding technologies, and a complete range of part-handling robots and turnkey automation systems. Every machine is backed with ENGEL technical know-how and highly trained factory service.

Visit us on Qmed
Products
ENGEL inject 4.0ENGEL inject 4.0
ENGEL inject 4.0ENGEL inject 4.0
Engineered Printing Solutions
2327
Automation, Manufacturing Equipment, Medical Labeling Equipment, Printing Equipment and Supplies
East Dorset, VT

Engineered Printing Solutions works closely with medical device manufacturers and their outsourcing partners in developing new techniques and custom automation for difficult-to-mark products. It custom designs pad and ink-jet printers for catheters, tubes, test strip materials, specimen trays, optical lenses, and syringes with pre- and post-treatment devices and full automation capabilities. It takes an idea from design to full realization.

Visit us on Qmed
Social Networks
Enoch Precision Machining
959
Contract Manufacturing Services, Medical Device Components
Clackamas, OR

Enoch is a full-service provider of precision machining services, specializing in close-tolerance milled and turned components. The company's services range from prototyping to platting.

Visit us on Qmed
Enplas Corp.
3374
Contract Manufacturing Services, Design Services, Medical Device Components, Molding Services
San Diego, CA

Enplas Corp., a public, global, injection molder of high-precision medical components, provides engineering, design optimization, evaluation and inspection, in-house mold production, cleanroom prototype, and mass production and assembly. With expertise in COC, COP, PP, PC, etc., and TPE overmolding, the company produces consumable components and microfluidic cartridges for IVD NGS, PCR, and other life science and biotech applications.

Visit us on Qmed
EntrePack Corp.
5560
S. El Monte, CA
Visit us on Packaging Digest
Enviro-Tech Industries
3427
Assembly Components, Contract Manufacturing, Precision Machining Parts and Services, Robotics
Boise, ID

Enviro-Tech Industries is a precision machining and mechanical assembly shop.

Visit us on Design News
EnvisionTEC Inc.
3609
Composites, Injection Molding, Rapid Prototyping or 3D Printing, Robotics
Dearborn, MI

Founded in 2002 with its pioneering commercial DLP printing technology, EnvisionTEC Inc. now sells more than 40 models of 3-D printers based on six distinct technologies that build objects from digital design files. The company's premium 3-D printers serve a wide variety of medical, professional, and industrial markets, and are valued for precision, surface quality, functionality, and speed.

Visit us on Design News
Social Networks
EOS North America
3508
Metals and Alloys, Plastics and Elastomers, Rapid Prototyping or 3D Printing, Robotics
Novi, MI

EOS is a pioneer and trusted global leader providing additive manufacturing solutions. The company's plastic and metal sintering technologies give customers highly customizable serial-production capabilities while maintaining part integrity and quality. EOS's machines, materials, and expertise help customers create their competitive edge and let their designs now drive their manufacturing.

Visit us on Design News
Social Networks
EP Container Corp.
5361
Rigid Containers
Artesia, CA

EP Container Corp. is a distributor of bottles, pails, drums, totes, UN boxes, barrier containers, and absorbents.

Visit us on Packaging Digest
EPflex Feinwerktechnik GmbH
1449
Cardiovascular, Medical Device Assembly, Medical Device Components, Research and Development
Dettingen

EPflex Feinwerktechnik GmbH is a pioneer in the development and manufacture of metallic components for minimally invasive medicine. The company has repeatedly developed solutions that have opened up completely new possibilities for diagnosis and treatment for doctors. EPflex's portfolio includes guidewires, stone baskets, snares, hypotubes, stylets, packaging, sterilization, and CE certification.

Visit us on Qmed
EPI Labelers
5021
Coding, Decorating, Labeling, Print-and-Apply Labelers
New Freedom, PA

For more than 36 years, EPI has provided simple and durable labeling equipment for the packaging industry. Engineered for ease of use and reliability, the company’s labeling machinery is designed to integrate into a customer's packaging process. EPI takes the time to understand each application and listen to its customers’ needs. Its precise thinking and simple design can help businesses.

Visit us on Packaging Digest
Epicor Software Corp.
3871
Software and Operating Systems
Austin, TX

Epicor Software Corp. drives business growth. The company provides flexible, industry-specific software that is designed around the precise needs of its manufacturing, distribution, retail, and service industry customers. More than 40 years of experience with its customers’ unique business processes and operational requirements is built into every solution—in the cloud, hosted, or on premises.

Visit us on Qmed
Visit us on Design News
Products
Epicor ERPEpicor ERP
Epilog Laser
1876
Lasers
Golden, CO

Epilog Laser is a leading designer and manufacturer of CO2 and fiber laser engraving, cutting, and marking systems. Used extensively in the medical device marking industry, the company's powerful, easy-to-use systems make it easy for manufacturers to serialize and brand their products.

Visit us on Qmed
Visit us on Packaging Digest
Social Networks
Epoxy Technology Inc.
725
Adhesives, Medical Device Assembly, Surface Treatment Coatings
Billerica, MA

Epoxy Technology Inc. is a leading global manufacturer and custom formulator of epoxy and UV adhesives for medical applications, such as pacemakers/defibrillators, ultrasound piezos, scintillator arrays, light guides, medical electronics, tools, instruments, and precision potting applications. It offers a complete line of ISO 10993– and USP Class VI–biocompatible materials. Epoxy Technology is ISO 9001 certified, and RoHS and REACH compliant.

Visit us on Qmed
Epoxyset Inc.
767
Adhesives, Chemicals, Medical Plastics
Woonsocket, RI

Epoxyset Inc. is a custom formulator and manufacturer of engineered epoxy, urethane, silicone, grease, and UV-cured systems for the electronic, medical, semiconductor, optic, automotive, and aerospace industries. It specializes in custom-engineered formulations that are used as adhesives, sealants, encapsulants, pottings, and coatings. Many products are BPA- and halogen-free, USP Class VI and ISO 10993-5 compliant, and nonhazardous for shipping.

Visit us on Qmed
Products
UV-8504EUV-8504E
Epson Robots
4109
Assembly, Automation, Robots and Robotic Accessories, Vision Inspection Systems and Services
Carson, CA

Epson Robots is a global leader in PC-controlled precision factory automation, with an installed base of more than 65,000 robots and a product line of hundreds of models of easy-to-use SCARA, six-axis, and Cartesian robots based on a common PC-based platform. Building on a more than 35-year heritage, the company delivers robots for precision assembly and material-handling applications in a wide variety of industries.

Visit us on Design News
Ercon Inc.
2352
Chemicals, Disposables, Printing Equipment and Supplies, Sensors and Detectors
West Wareham, MA

Ercon Inc. manufactures biosensor coating materials, including a broad range of conductive inks used in electrochemical sensors for the detection, quantification, and monitoring of bodily fluid and environmental constituents. The company's patented chloridized silver compositions and proprietary carbon particles technologies are used in billions of blood glucose sensor test strips each year.

Visit us on Qmed
ErectaStep
4942
Container Handling
Andrews, SC

Improve safety and productivity with ErectaStep's OSHA- and IBC-compliant metal stairs, YellowGate’s safety gates, and Rollastep’s rolling stairs and mobile platforms. Save time and money, and eliminate custom fabrication with ready-to-ship metal stairs, metal work platforms, crossover stairs, and portable stairs.

Visit us on Packaging Digest
Social Networks
Products
ErectaStepErectaStep
ERIKS Seals and Plastics Inc.
847
Molding Services, Surface Treatment Coatings
Renton, WA

ERIKS was founded in 1940 in Alkmaar, Netherlands. Today, the company is a leading provider of a wide range of high-quality mechanical engineering components and associated technical and logistics services. ERIKS Seals and Plastics Inc., a U.S. division of ERIKS, focuses specifically on sealing and custom plastics products, and offers related technical and logistics services for consumer products, food and beverage, and heavy equipment.

Visit us on Qmed
Esko
5039
Packaging Design
Miamisburg, OH

Esko is a global supplier of integrated solutions for the packaging and labels, sign and display, commercial printing, and publishing industries. The company's products and services drive profitability in the packaging and printing supply chain by reducing time-to-market and raising productivity.

Visit us on Packaging Digest
Social Networks
Esma Inc.
1827
Surface Treatment Equipment
South Holland, IL

Esma Inc. is a leading manufacturer of surface-treatment equipment, including passivation, electropolishing, and ultrasonic cleaning systems. The company's automated passivation systems are unique to the industry, moving fluids, not parts, during the process. Esma also manufactures benchtop electropolishing equipment and ultrasonic washers, as well as related chemistries.

Visit us on Qmed
Social Networks
ESS Technologies Inc. VIDEO
2964
Automation, Packaging Equipment
Blacksburg, VA

ESS Technologies Inc., founded in 1993, specializes in complete packaging line design, equipment manufacturing, and integration. The company is a strategic partner with FANUC America for robotic secondary packaging and palletizing of pharmaceuticals and cosmetics. Engineered for reliability and efficiency, ESS Technologies’ innovative solutions offer tomorrow’s packaging technology today.

Visit us on Qmed
Social Networks
Company Video
Products
Aseptic Robotic Syringe Filler and CapperAseptic Robotic Syringe Filler and Capper
Robotic Aseptic Syringe Filler and CapperRobotic Aseptic Syringe Filler and Capper
Robotic Aseptic Syringe Filler and CapperRobotic Aseptic Syringe Filler and Capper
Essential Robot Products Inc.
4489
Automation, Material Handling, Robots and Robotic Accessories, Welding
Mishawaka, IN

Essential Robot Products Inc. specializes in robotic automation and cost-effective maintenance products. The company's offerings support key operations in material handling, spot welding, mechanical gripping, robotic milling/drilling/de-burring, robotic cable management, robotic transfer, and force-and-force/torque sensing. Its lines also offer superior OEM quality ABB robot service parts as well as robust, low-cost microwelding solutions.

Visit us on Design News
ETEL
4294
Automation, Controls, Motion Control, Production Machines and Equipment
Schaumburg, IL

ETEL, a Heidenhain-owned company, is 100% dedicated to direct drive technology. The company's range of linear and torque motors, position and motion controllers, and high-end motion system products is substantial, providing a large selection to meet nearly all customers' needs and providing them with process improvement they have been looking for.

Visit us on Design News
Etigam B.V.
1953
Quality and Testing, Sterilization Equipment, Sterilization Services, Testing Services
Apeldoorn

Etigam B.V. / Sterimark Inc. is a manufacturer of sterilization process indicators for gamma/E-beam, ETO, and steam sterilization. The company's self-adhesive dots or customized labels change color during the sterilization process and are used for identifying processed and unprocessed products. Also available are biological indicators (strips, suspensions, and self-contained).

Visit us on Qmed
EtQ LLC
2459
Software
Farmingdale, NY

EtQ is the leading quality, operational risk, and compliance management software provider for identifying, mitigating, and preventing high-risk events through integration, automation, and collaboration. To learn more about the company and its various product offerings, visit its Web site.

Visit us on Qmed
Eurofins Medical Device Testing
636
Testing Services
Lancaster, PA

With 16 laboratories in North America, Europe, and Asia Pacific, Eurofins Medical Device Testing offers regulatory compliance expertise and experienced GMP/GLP/ISO 17025 testing to ensure rapid turnaround times with the highest level of service, and most advanced technologies for its customers' analytical chemical, microbiological, biocompatibility, electrical, mechanical, and package testing needs.

Visit us on
Euroflex GmbH
1994
Medical Device Components, Medical Materials - Raw Materials, Medical Tubing Processing, Medical Tubing Types
Pforzheim

Euroflex GmbH is a global leading supplier of high-grade semifinished products, components, and actuators from a variety of materials. Fast sample production, customer support from sample to serial production, and extensive analysis and investigation methods are among the services of the company.

Visit us on Qmed
Evergreen Packaging Group Inc.
5477
Plastic Sheet, Protective Packaging
Commerce, CA

Evergreen Packaging Group Inc. is a manufacturer and distributor for protective packaging products. The company manufactures air bubble sheets and bubble mailers in its commerce facility. Evergreen also carries foam rolls, poly mailers, packing tape, stretch film, and other warehouse and shipping supplies. The company's priority is the care of its customers; it has been dedicated to supplying high-quality products at competitive prices.

Visit us on Packaging Digest
Everite
2852
Contract Manufacturing Services, Manufacturing Equipment, Medical Device Assembly, Medical Device Components
Pennsauken, NJ

Everite manufactures ECG machine tools, serving the medical device industry with burr-free production. The company offers ECG tube cutoff, ECG surface grinders, and ECG trim machines.

Visit us on Qmed
Products
ACOM-1 Burr-free, ECG Automatic Tube Cutoff MachineACOM-1 Burr-free, ECG Automatic Tube Cutoff Machine
Evolve Manufacturing Technologies Inc.
434
Contract Manufacturing Services, Manufacturing Equipment, Medical Device Assembly, Semiconductors
Fremont, CA

Evolve Manufacturing Technologies Inc. is a contract manufacturer offering innovative turnkey solutions for precision mechanical, electromechanical, and medical products for a variety of customers and industries. The company is ISO 9001 and ISO 13485 certified; and FDA, ITAR, and WBENC registered. Some of its markets include medical, semiconductor, aerospace, industrial equipment, and defense.

Visit us on Qmed
Evonik Industries
2346
Implantable Devices, Medical Materials - Raw Materials, Medical Plastics, Packaging Materials and Products
Parsippany, NJ

Evonik’s CYROLITE® multipolymer compounds for medical devices/diagnostics are transparent, bondable, chemical resistant, and BPA-free. Specialty polyamides—VESTAMID® Care and TROGAMID® Care—and VESTAKEEP® Care PEEK materials are biocompatible polymers that offer a range of physical and mechanical properties for medical device applications. Applications include catheters, luer locks, Y-sites, surgical instrumentation, and fixation devices.

Visit us on
Exacto Medical
1359
Cable and Wires, Contract Manufacturing Services, Medical Device Assembly, Medical Device Components
Grafton, WI

Exacto Medical manufactures and assembles products made from all types of wire in any configuration. Assembly operations include laser welding, gluing, crimping, and cleaning in a seven-stage multisonic washing system in the company's ISO Class 7 cleanroom. Exacto Medical also produces compression, extension, and torsion springs. The company prides itself in taking a concept to market.

Visit us on Qmed
Excelitas Technologies
2321
Adhesives, Biotechnology, Medical Device Assembly, Medical Device Components
Mississauga, ON

Excelitas, a global technology leader specializing in innovative, customized photonic solutions, is showcasing the latest high-performance UV-curing and lighting solutions for medical applications. With extensive design, engineering, and manufacturing capabilities, it offers a wide portfolio of UV-curing, LED, and fluorescence light sources that address the demands of medical challenges. It has ISO-certified facilities for medical devices.

Visit us on Qmed
Social Networks
Products
APOLED Customizable Single-Chip LED PackagesAPOLED Customizable Single-Chip LED Packages
OmniCure S2000 UV Curing SolutionOmniCure S2000 UV Curing Solution
OmniCure LX500 UV LED Curing SolutionOmniCure LX500 UV LED Curing Solution
Excelta
1968
Biotechnology, Cleanroom, Medical Device Assembly
Buellton, CA

Excelta offers a large selection of assembly and production instruments for biomedical device manufacturing and assembly. The company offers high-quality Swiss and Italian tweezers and forceps, safety razor blades, scissors, probes, brushes, and optics. Excelta manufactures a complete line of optimum flush diagonal cutters at its headquarters in Buellton, California. It maintains a custom shop where customer ideas can come to life.

Visit us on Qmed
Social Networks
Products
5-CO5-CO
EXOVA
2515
Testing Services
Mississauga, BC

EXOVA's laboratory has been servicing the medical device, polymer, and pharmaceutical industries for more than four decades. The company is an expert in the development, prototyping, and testing of medical devices and implantable materials. Its laboratory is ISO 17025 accredited and FDA/Health Canada inspected.

Visit us on Qmed
Expocell Group
631
Batteries, Power Supplies and Converters
Ontario, CA

Expocell Group is a battery manufacturer with sales, marketing, design, warehousing, and support capability located in Ontario, Southern California. The company manufactures and markets a complete line of batteries, including alkaline, heavy-duty, rechargeable, VR lead acid, charger, lithium rechargeable batteries, button/coin cells, private label, and custom battery pack for OEMs.

Visit us on Qmed
Express Manufacturing Inc.
3082
Cleanroom, Contract Manufacturing Services, Quality and Testing
Santa Ana, CA

Express Manufacturing Inc. (EMI) is an electronics manufacturing services provider. For more than 34 years, the company has been a valued manufacturing partner supporting the world’s largest OEMs in a broad range of industries. Having achieved ISO 13485:2003 and AS9100 certifications, EMI is well-recognized and has been Southern California’s largest contract manufacturer for nine consecutive years.

Visit us on Qmed
Social Networks
Express Tubes Inc.
5170
Bottles, Jars, Pouches, Tubes
Kent, WA

Express Tubes Inc. is a U.S. company located near Seattle, Washington, that has been producing anywhere from 5,000 to 5 million items of high-quality plastic packaging to clients worldwide since 2003. It offers low minimums, no maximums, free preproduction samples, quick lead times, and legendary customer service, from concept to creation.

Visit us on Packaging Digest
Extel Technologies
3304
Consultants, Contract Manufacturing Services, Design Services, Medical Device Assembly
Irvine, CA

Extel Technologies has been operating in the electronics industry for more than 25 years. Thanks to its innovation-based approach, it has become a leading provider of specialist electronic product design and manufacturing. In every aspect of its business, from developing new products to manufacturing unique prototypes, Extel focuses on technical attributes. This approach leads to a shorter time-to-market and cost-efficient products.

Visit us on Qmed
Extron/Knurr
1368
Cases, Design Services, Enclosures, Mobile Health
Milpitas, CA

Extron is the U.S. manufacturer for Knurr products, a leading global line of mobile electronics carts, enclosures, and consoles. Its modular designs are used by the world’s largest OEMs and medical companies to build their mobile medical carts. Knurr products are German-engineered and American-made at its ISO 9001– and ISO 13485–certified 120,000-sq-ft manufacturing plant in Milpitas, California. Visit its Web site for more information.

Visit us on Qmed
EZO SPB-USA Precision Ball Bearings Japan
3282
Manufacturing Equipment, Motion Control, Motors, Pumps
Sarasota, FL

EZO SPB Precision Ball Bearings Japan is a manufacturer of EZO precision ball bearings. The company's facility, located in Sarasota, Florida, enables it to serve the needs of the OEM user as well as industrial distributors throughout North and South America. EZO-SPB bearings are currently being used in applications such as AC/DC motors, power tools, encoders, flow meters, pumps, measuring devices, and medical equipment.

Visit us on Qmed
Products
EZO SPB-USA PRECISION BALL BEARINGS JAPANEZO SPB-USA PRECISION BALL BEARINGS JAPAN
#AdvMfgExpo
  • Press/News
  • Contact Us
  • FAQs
  • UBM Event Calendar
  • Terms of Service
  • Legal Entities
  • Privacy
  • Copyright © 2018
#AdvMfgExpo